About
This programme is specifically designed to identify and resolve issues of production planning and scheduling in petroleum refineries that are most commonly encountered by refinery personnel working in this area. Issues of operations scheduling for petroleum refining are discussed in depth. It will also be enhanced with planning and scheduling examples and will provide relevant background information of the subject.
Additionally the programme will present a detailed overview of refining process yields, from the crude oil feed to the finished products. Major refining processes are presented and discussed, including feedstock, feedstock preparation, operating conditions, catalysts, yields, product properties, and economics.The program is oriented toward the practical aspects of refinery operations as well as the terminology and economics of refining.
The seminar is split into two modules:
MODULE I – Production Planning & Scheduling Petroleum Refineries
MODULE II – Refinery Process Yields Optimisation
Each module is structured and can be taken as a stand-alone course; however, delegates will maximise their benefits by taking Module 1 and 2 back-to-back as a two-week seminar.
The key objectives of this comprehensive seminar are as follows:
- Gain an appreciation of modern planning and scheduling tools that will be useful for planning of crude and product deliveries in their facilities
- Assist in improved operations, optimization, upgrading and modification of existing facilities
- Will result in improved profitability and help in continuous modernization of facilities
- Act as a primer into the industry of Petroleum Refining to maximise process fluid yields
- Familiarize industry professionals with all processes associated with the processing of petroleum into finished products
- Equip new engineers into the industry, with the basic tools for understanding the complex nature of Refining and its operations
Petroleum Refining-Production Planning, Scheduling and Yield Optimization is a hands on, stimulating learning experience. The programme will be highly interactive, with opportunities to advance your opinions and ideas. Participation is encouraged in a supportive environment.
To ensure the concepts introduced during the programme are understood, they will be reinforced through a mix of learning methods, including lecture style presentation, open discussion, case studies, and group work.
Attendees will have the opportunity to develop personal competencies and build up expert knowledge of crude oil production planning, scheduling and yield optimization in a range of equipment.
Process Engineers, Technologists, Operating and Supervisory personnel engaged in the refining activities who have a minimum of experience and who are required to understand and discuss issues related to their processes.
As well as engineering, this training session will also be suitable for business, sales, technical, and scientific personnel with limited or no broad refinery operating experience, along with Technical sales personnel; those involved in selling equipment or supplies to the refining industry and those involved with economic evaluations of refinery operations will benefit from this training session.
Day 1 – Application of Planning and Scheduling
- Overview of planning and scheduling in oil refineries
- Refinery Configuration:
- Hydro skimming Refinery
- Refineries with Secondary Conversion Process
- Integrated Refineries
- Existing & New Refineries
- Choice of Crude
- Crude oil scheduling
- Choice of Processes
- Capacity utilization of Crudes
- Severity of Process Operations
- Cut-points Optimization
- Facing Upset Situations
- Tankage Requirement
Day 2 – Improving Product Movements and Releasing Tankages
- Basic Information Required
- Crude Assay
- Intermediate Feed Characteristics
- Yields and Properties
- Different Process Units
- Utilities
Day 3 – Product Blending Rules
- Product Specifications
- New Trends in fuel production
- Environmental Issues
- Crude Cost
- Product Netback
Day 4 – Formulation of Problem
- Refinery Flow-sheets
- Simplified Material Balance
- General Formulation
- Demand Equations
- Product Inventory Control
- Product Quality Control
- Fixed Composition Blend
- Capacity Control/ Constraints
- Availability of Feedstock/ Control
Day 5 – Application to a Refinery Worksheet
- Petroleum Product Movement and Product Exchange
- Marginal Depot Supply and movements
- Commonly Used Methods & Recent Developments
- Mathematical Approach to Solution
- Linear Programming
- Graphic Method
- Vendors Software
- Discussion and Summary
Day 6 – Crude Oil Yields Refinery Technology
- Introduction
- Crude Oil Origins & Characteristics
- Crude oil Assay and properties
- Crude oil products
- Product specifications
- Gasoline
- Kerosene/ Jet Fuel
- Fuel Oil/ Diesel Fuels
- Petrochemical Feedstocks
- Refineries Complexity
- Overall refinery flow: Interrelationship of processes
Day 7 – Petroleum Refinery Processes
- Crude Processing
- Desalting
- Atmospheric distillation
- Vacuum distillation
- Heavy Oils Processing – Cocking and Thermal Processes
- Delayed Coking
- Fluid Coking
- Flexicoking
- Visbreaking
- Case study – example
Day 8 – Process for Motor Fuel Production
- Fluid catalytic cracking
- Hydrocracking
- Cat Cracking
- Isomerization
- Alkylation
- Hydrotreating
- Catalytic Reforming
- Case study – example
Day 9 – Supporting Operations
- Blending for Product Specifications
- Hydrogen production
- Refinery Gas Plants
- Acid Gas Treating
- Sulfur Recovery Plants
- Case study – example
Day 10 – Refinery Economics
- Residue Reduction
- Asphalt and Residual Fuel
- Cost Estimation
- Economic Evaluation
- Case Studies
- Group Discussions
- Program Evaluation & Summary
Training Methodology
Pathways Training and consulting adopts the newest techniques of human resources Training and consulting and, with the following:
- Theoretical lectures are delivered via PowerPoint and visual displays (videos and short films)
- Making scientific evaluation to the trainee (before and after)
- Brainstorming and role-playing
- Using case studies related to the scientific material being delivered and the trainees' work.
- The participants get the scientific and practical material printed and on CDs and Flash memories.
- Preparing records and reports of the participants' attendance and results, with a general evaluation of the training program.
- A group of the best trainers and experts in all fields and specialties professionally prepares the scientific material.
- After finishing the course, the participants get certificates of attendance signed, certified, and issued by pathways Training and consulting.
- Our training programs start at 9:00 o'clock in the morning and end at 2:00 in the afternoon, with snack buffet during the lectures.
- Providing a lunch buffet during the training program period, with organizing a lunch party on the training program final day for taking some photos and certificate awarding.
